The Scope and Purpose of a Commercial Property Inspection
Purchasing property involves risk
The purpose of a property inspection is to help reduce the risk associated with the purchase of a structure by providing a professional opinion about the overall condition of the structure. A property inspection is a limited visual inspection and it cannot eliminate this risk. Some homes present more risks than others. We cannot control this, but we try to help educate you about what we don’t know during the inspection process. This is more difficult to convey in a report and one of many reasons why we recommend that you attend the inspection.
A Commercial Property Inspection is Visual and not destructive
The descriptions and observations in this report are based on a visual inspection of the structure. We inspect the aspects of the structure that can be viewed without dismantling damaging or disfiguring the structure and without moving items and interior furnishings. Areas that are concealed, hidden or inaccessible to view are not covered by this inspection. Some systems cannot be tested during this inspection as testing risks damaging the building. For example, overflow drains on HVACs are generally not tested because if they were found to be leaking they could damage the finishes below. Our procedures involve non-invasive investigation and non-destructive testing which will limit the scope of the inspection.
This is not an inspection for code compliance
This inspection and report are not intended for city / local code compliance. During the construction process structures are inspected for code compliance by municipal inspectors. Framing is open at this time and conditions can be fully viewed. Framing is not open during inspections of finished homes, and this limits the inspection. All houses fall out of code compliance shortly after they are built, as the codes continually change. National codes are augmented at least every three years for all of the varying disciplines. Municipalities can choose to adopt and phase in sections of the codes on their own timetables. There are generally no requirements to bring older homes into compliance unless substantial renovation is being done.
This is just our opinion
Construction techniques and standards vary. The observations in this report are the opinions of the inspector. Other inspectors and contractors are likely to have some differing opinions. You are welcome to seek opinions from other professionals.
The scope of this inspection
This inspection will include the following systems: exterior, roof, structure, drainage, foundation, attic, interior, plumbing, electrical and heating. The evaluation will be based on limited observations that are primarily visual and non-invasive. This inspection and report are not intended to be technically exhaustive.
Your expectations
The overall goal of a commercial property inspection is to help ensure that your expectations are appropriate with the property you are proposing to buy or lease. To this end we assist with discovery by showing and documenting observations during the property inspection. This should not be mistaken for a technically exhaustive inspection designed to uncover every defect with a building. Such inspections are available but they are generally cost-prohibitive to most owners.
Your participation is requested
Your presence is requested during this inspection. A written report will not substitute for all the possible information that can be conveyed verbally by a shared visual observation of the conditions of the property.
How to Read This Report
Getting the Information to You
This report is designed to deliver important and technical information in a way that is easy for anyone to access and understand. If you are in a hurry, you can take a quick look at our "Summary Page” and quickly get critical information for important decision making. However, we strongly recommend that you take the time to read the full Report, which includes digital photographs, captions, diagrams, descriptions, videos and hot links to additional information.
The best way to get the layers of information that are presented in this report is to read your report online (the HTML version), which will allow you to expand your learning about your property. You will notice some words or series of words highlighted in blue and underlined – clicking on these will provide you with a link to additional information. The HTML version of this report also contains streaming videos. Short video clips often contain important information and critical context and sounds that can be difficult to capture in words and still pictures.
For the most reliable viewing experience, I recommend viewing the report on as large a screen as practical, as much detail can be lost on small devices like smart phones. For similar reasons, reports should only be printed in color to retain as much detail as possible and minimize misinterpretation of photographs.
This report can also be printed on paper or to a PDF document.
Chapters and Sections
This report is divided into chapters that parcel the commercial property into logical inspection components. Each chapter is broken into sections that relate to a specific system or component of the property. You can navigate between chapters with the click of a button on the left side margin.
Most sections will contain some descriptive information done in black font. Observation narrative, done in colored boxes, will be included if a system or component is found to be significantly deficient in some way or if we wish to provide helpful additional information about the system or the scope of our inspection. If a system or component of the property was deemed to be in satisfactory or serviceable condition, there may be no narrative observation comments in that section and it may simply say “tested,” or “inspected.”
Observation Labels
All narrative observations are colored, numbered and labeled to help you find, refer to, and understand the severity of the observation. Observation colors and labels used in this report are:
- Major Concern:Repair items that may cost significant money to correct now or in the near future, or items that require immediate attention to prevent additional damage or eliminate safety hazards.
- Repair:Repair and maintenance items noted during inspection. Please note that some repair items can be expensive to correct such as re-finishing hardwood floors, but are considered simply repair items due to their cosmetic nature.
- Recommended Maintenance:These are repair items that should be considered "routine home ownership items," such as servicing the furnace, cleaning the gutters or changing the air filters in the furnace.
- Monitor:Items that should be watched to see if correction may be needed in the future.
Pest Inspection
All items with the bug logo () are part of a structural pest inspection. If your inspector included a structural pest inspection as a part of the scope of your inspection, you can distinguish pest inspection items by this logo. You can also go to the pest inspection summary page to see a summary of the items that are part of a pest inspection.
Summary Page
The Summary Page is designed as a bulleted overview of all the observations noted during inspection. This helpful overview is not a substitution for reading the entire inspection report. The entire report must be read to get a complete understanding of this inspection report as the Summary Page does not include photographs or photo captions.
Moisture Meter Testing
Where moisture meter testing is indicated in this report a Protimeter Survey Master Dual Function was used.
Summary
Major Concerns
No major concerns were noted during this visual inspection.Repairs
- LG-1 Lots and Gounds - Parking Lots:
Recommended Maintenance
- R1-5 ROOF - RTUs:
- LG-3 Lots and Gounds - Drainage and Site:
CLEAN AND SERVICE THE DRAINAGE SYSTEM
I recommend a cleaning and servicing of the site drainage system to ensure all ground water and roof runoff is being reliably controlled and diverted away from the building. Examples of observations noted during inspection include:
Items for Monitoring
- R1-3 ROOF - Roof Materials:
- R1-4 ROOF - Roof Materials:
MONITOR TRICKY DEAD VALLEY ROOF SPOT
Areas of roof were noted that are not ideal for reliable roof drainage and may require regular maintenance. Organic debris may accumulate in these areas, or snow and ice build up during the winter months. Such areas often arise early in the design phase of construction, where design and aesthetics can trump a practical roofline. Other times, these areas result from changes to the roofline during additions and renovations. No leaks were noted in these areas during today's visual inspection; however, they may become problematic if they are not monitored and maintained. Examples and locations of areas that should be monitored and maintained include:
Recommendation
Keep the roof clean and monitor these tricky spots where debris could easily obstruct proper drainage.
📸 The Complete Report
ROOF
Roof Materials
Method of Roof Inspection: Viewed with a drone
Please note that the roof was too tall to access by ladder and walk safely. A drone was used to try and get some information about the roof. This is not as good an inspection as walking the roof but is the best and safest option, given limited access. Any relevant photos or videos will be included in this report.
Roof Style: Flat
Flashings, Valleys and Penetrations: Present and Visually Standard
Roof flashings are used to keep a roofing system waterproof where the roofing material starts, stops, changes direction, or is penetrated. During the inspection, we look for standard flashing techniques that could be considered normal or standard in our region. Damaged, incomplete or non-standard flashings can be a sign of an older or less reliable roofing system and may require repair. Any non-standard flashings noted during the inspection will be reported below if found.
Roof Covering Materials: Concrete tiles
Approximate Age of Roof Covering: 25-30 Years
MONITOR TRICKY DEAD VALLEY ROOF SPOT
Areas of roof were noted that are not ideal for reliable roof drainage and may require regular maintenance. Organic debris may accumulate in these areas, or snow and ice build up during the winter months. Such areas often arise early in the design phase of construction, where design and aesthetics can trump a practical roofline. Other times, these areas result from changes to the roofline during additions and renovations. No leaks were noted in these areas during today's visual inspection; however, they may become problematic if they are not monitored and maintained. Examples and locations of areas that should be monitored and maintained include:
Recommendation
Keep the roof clean and monitor these tricky spots where debris could easily obstruct proper drainage.
RTUs
Method of Roof Inspection: Viewed with a drone
Roof Style: Flat
Flashings, Valleys and Penetrations: Present and Visually Standard
Roof Covering Materials: Concrete tiles
Approximate Age of Roof Covering: 25-30 Years
Lots and Gounds
Parking Lots
Grounds
Drainage and Site
Clearance to Grade: Standard
CLEAN AND SERVICE THE DRAINAGE SYSTEM
I recommend a cleaning and servicing of the site drainage system to ensure all ground water and roof runoff is being reliably controlled and diverted away from the building. Examples of observations noted during inspection include:
Stairwells
ELECTRIC SERVICE
Electrical System Safety Overview
Electric Service Voltage Tested
Service Voltage: 3 Phase
Electric Service
Service Entrance: Above Ground
Meter Base Amperage: 200
